Engine Control Module for XB12 model motorcycles with various exhaust systems such as XB ProSeries, Jardine, Drummer, Hawk, D&D, Force, or Special Ops. This ECM also works with a free flowing air filter. 2004 to 2007 model year bikes require zeroing of the TPS (throttle position sensor) via Digital Tech at your local dealer. 2008-newer bikes also require a TPS reset, but this procedure can be performed by the owner without any necessary specialty tools. Use of this ECM is not intended for vehicles operated on the road or otherwise subject to emission control requirements. In California, this product should not be used on any vehicle that is registered or licensed for use on public roads. **Model Years Available: 2004 - 2010 **Calibrations designed for non-catalyst stock headpipe** Please select your exhaust system & model year from the drop-down menu below to ensure the proper ECM match. PLEASE NOTE: NOT ALL EXHAUST OPTIONS ARE AVAILABLE FOR EVERY MODEL YEAR Choose from one of the following exhaust options: Buell® Motorcycle Co. Pro Series D&D Drummer Drummer SS Jardine RT-1 Special Ops Hawk Force Stock ***You may notice different cooling fan operation with the EBR ECM for 2008-2010 model year bikes compared to the operation with your stock ECM. This is normal due to the revised cooling fan strategy that is programmed into these ECM's.*** NOTE: The ECM is shipped with a non customizable calibration, and no options are available. This ECM as delivered contains one race calibration map, and cannot be re-programmed through our tuning software kit. In order to be able to program right away, you must buy Y1152.08AH DDFI 3 XB PROGRAMMABLE ECM KIT or Y2152.08AH DDFI 2 XB PROGRAMMABLE ECM KIT. You also may choose to add the ability to program later using Y1052.08AH PROGRAMMABLE ECM SOFTWARE AND CABLE, but it will require shipping the ECM back to Erik Buell Racing to be synced with the software license.
|Disable Add To Cart||N/A|